I always get that sinking feeling in my stomach when a client reports that their solar pool heater is not working. What that usually means is the pool is not getting warm, or at least the solar pool heater is not performing as well as it once did. Once I get over the initial uneasy feeling, I get back to rational thought and go through the technical diagnostics. In the end, a large majority of the problems come down to one solution — clean your filter!

This is where I get that quizzical look of disbelief from people. In fact, some argue vehemently. “I have a great pool company. They clean my filter weekly. That does’t make sense. Yada, yada, yada.”

It’s hard telling people that their pool is not being maintained adequately. Some take it as if I have cast a serious aspersion upon them. And the last thing I want to do is throw pool service companies under the bus – we work with many of them. But in the end, a dirty pool filter restricts flow, reducing the effectiveness of solar pool heating systems (not to mention the cleaning effectiveness of your sanitation system). Much like a dirty air conditioning filter, a dirty pool filter needs to be replaced periodically. In fact, we recommend replacing the filter with a new one every 6-12 months depending on how much use you pool gets. If you don’t have a screened pool cage or have other vegetative debris issues, more frequent cleaning and replacement is required. Despite a regular and vigorous cleaning schedule, eventually small particles clog filter cartridges, and replacement is the only option.

The pump did not have a chance. With this kind of pressure, the pump isn’t moving any water!

I recently went to a home where the pool was just 70ºF. That’s cool for this time of year, and the homeowner had a well sized solar pool heater. My attention went straight to the filter. When I arrived, as in many cases, the pressure gauge on the filter was broken. On this particular filter style, it is hard to remove the cover screw without breaking the gauge eventually. Fortunately, I always carry spare gauges with me, so my first order of business was to swap out the broken gauge.

When I started the 1.5HP pump back up, sure enough, the pressure rose immediately to 39 PSI! If you look at the performance curve for typical pool pumps, once the total system pressure (called total dynamic head) exceeds 30 PSI, the flow rate starts to drop dramatically. The filter pressure is only part of total dynamic head, ignoring the suction pressure. In other words, the total pressure in this system was well over 40 PSI, and at that pressure the flow rate had dropped to almost nothing. There were a few hints before measuring the pressure. For example, the pool had little deck fountains that had dropped to a trickle, and the check valve with clear cover showed a flapper that was barely moved out of the closed position. In truth, I knew we were looking at a flow restriction issue before I even replaced the gauge.

The next step was to check the system pressure with the solar on and bypassed. If there was restriction in the solar panels, bypassing the solar would have shown a dramatic drop in the pressure. In this case, it did not, which indicated that the flow restriction was unrelated to the solar panels. All of the valves were in the correct position, so the issue appeared to be the filter cartridge.

In this case you could plainly see that the filter was filthy and had been seriously neglected. It didn’t look like the pool company had cleaned it in months. The homeowner admitted that the cartridge had probably not been changed in over three years. I’m not in the business of getting pool service companies fired, so I gently explained how it is important to maintain the filter properly and replace it on a regular schedule. That’s just part of the cost of owning a pool, and a clean filter will result in an easier to maintain pool. It’s understandable that your pool service company, who is charging you good money to maintain the filter cartridge, doesn’t want to tell you that there is an additional expense of periodically changing your filter, but that is the reality of proper pool maintenance. The best thing to do is ask them if they can economically perform this service for you. Tell them you want your pool properly maintained, including regular cartridge replacement. They will be happy you asked, and will make a few extra bucks performing this service for you!

Remove your pool filter cartridge to see if it needs to be replaced. After removing this cartridge, the pressure dropped by 15 PSI. A filter cartridge should only add 1 or 2 PSI at typical pool circulation flow rates.

If you solar pool heater is not working, or not working like it used to, your first step should be to investigate your filter cleanliness, clean it, and possibly replace it. Low flow reduces the effectiveness of solar pool heating systems, and once your flow rate approaches zero, solar pool heaters become totally ineffective.

If you are having other performance issues with your solar pool heating system, call your solar dealer’s service department and ask for additional tips!